Appendix C: Ping Ip Address - Honeywell 3MP User Manual

Appendix C: PING IP Address

10 Appendix C: PING IP Address
72
The PING (stands for Packet Internet Groper) command is used to detect whether a
specific IP address is accessible by sending a packet to the specific address and waiting
for a reply. It's also a very useful tool to confirm the device installed or if the IP address
conflicts with any other devices over the network.
If you want to make sure the IP address of the device, utilize the PING command as
follows:
Launch a Command Prompt.
•
Type ping x.x.x.x, where x.x.x.x is the IP address of the device. For example, ping
•
192.168.0.100
The replies, as illustrated below, will provide an explanation to the problem.