Honeywell 3MP User Manual page 52

Administrating the Device
Name:
To assign a name to the selected profile.
Video Type:
Video codec of the selected profile. If the H.264 encoder is selected, then there are 3
modes of profile selectable: baseline, main and high profile.
Resolution:
Show the resolution of the selected profile.
Rate Control:
Defines the rate control method of this profile. ONVIF Profile support Enhanced Variable
Bit Rate (EVBR) only. It is limited by ONVIF development document.
For EVBR, the video bitrate is based on normal VBR mode. However, the bitrate can be
limited to the max bitrate while lots of motion in video.
Max Frame Rate:
Defines the targeted frame rate of this profile. For example, set the frame rate to 30 fps,
then the image will be updated for 30 frames per second as possible. User need to set
reasonable max frame rate versus video quality under the limited bandwidth.
GOP Control:
Defines the Intra/Inter-frame (I/P) ratio of this profile. For example, set the GOP to 30, then
the video stream will have one Intra-frame every 30 frames.
Audio:
To enable or disable audio function.
Multicast Video:
46