Roi; Figure 18 Roi Settings - Honeywell 35 Series User Manual

The bit rate changes according to the complexity of the scene.
Max bitrate(kbps): Indicates the maximal value of the bit rate. Set 500~12000 for max
bitrate.
Image Quality: Select a desired quality ranging from Lowest to Highest.
Smart encode: Check the checkbox to enable Smart Encode.
•
Smart encode includes H.264 & H.265.
•
The storage space will be reduced fifty percent when smart encode is enabled.
•
Only main stream supports smart encode.

ROI

The ROI function allows you to configure 8 ROI windows (Region of Interest, with
Foreground quality) on the screen. Areas not included in any ROI windows will be
considered as the non-interested areas. The details in the ROI areas will be transmitted
in a higher-quality video format. you may set up an ROI window as a privacy mask by
covering a protected area using an ROI window, while the rest of the screen becomes
the non-interested area.
Go to Setup > Camera Setup > Video > ROI.

Figure 18 ROI Settings

Stream profile: select Main stream, Sub stream, or Third stream to set the stream
profile.
Enable: Check the checkbox to enable the ROI (Region of Interest).
Area id: Select a value from the drop-down list box to set the ROI area ID. You can add 8
areas in total.
Level: Select a value from the drop-down list box to set the visual effect of ROI. Setting
as Level 1 will get the best effect for highest quality video within the interested area and
the fuzziest video for non-interested areas.
Area name: Enter a customized name for areas. The maximum value cannot exceed 32
bytes.
20
Honeywell 35 Series IP Cameras User Guide