Honeywell 3MP User Manual page 39

White Balance:
Auto: will adjust the white balance automatically.
Hold: will hold the white balance.
Iris/Exposure Control:
Change Iris and Exposure mode to fulfill different environment.
-
Auto Iris:
Controlling the coming light by exposure time and Iris. Firstly, IP cam will adjust the
exposure time to reach the screen presentation, If the image is still overexposure, camera
will narrow the iris to maintain correct brightness image.
-
Auto Exposure:
Under auto Exposure mode, the exposure time are selectable for the following duration:
1/120, 1/60,1/30 on 60Hz, 1/100, 1/50, 1/25 on 50Hz. User can select this mode when
camera is installed in indoor environment. It can prevent flick problem.
-
Hold Exposure:
Hold exposure time (To the value detected by the current picture).
-
Manual Exposure:
User can configure sensor exposure to fixed setting.
-
Outdoor:
Does not limit the exposure time, the range supported by upper and lower limits for the IP
Cam.
Honeywell
33