Honeywell 3MP User Manual page 29

Honeywell
MAC address:
Displays the Ethernet MAC address of the device. Note that user can not modify it.
Obtain IP address automatically (DHCP):
DHCP: Stands for Dynamic Host Configuration Protocol.
Enable this checked box when a DHCP server is installed on the network to issue IP
address assignment. With this setting, the IP address is assigned automatically. If this
device cannot get an IP address within limited tries, the device will assign a default IP
address, 192.168.0.100, by itself as the default IP address.
IP address, Subnet mask, and Gateway:
If you do not select Obtain an IP address automatically, then you need to enter these
network parameters manually.
Obtain DNS from DHCP:
DNS: Stands for Domain Name System.
Enable this checked box when a DHCP server is installed on the network and provide DNS
service.
Primary DNS and Secondary DNS:
If you do not select Obtain DNS from DHCP, then you need to enter these parameters
manually.
HTTP Port:
The HTTP port is changeable. Users could assign the port number of http protocol, and the
WAN users should follow the port number to login. If the http port is not assigned as 80,
users have to add the port number in back of IP address. For example:
http://192.168.0.100:8080.
23