Onvif Profile - Honeywell 3MP User Manual

Honeywell
Defines the targeted frame rate of this profile. For example, set the frame rate to 30 fps,
then the image will be updated for 30 frames per second as possible. User need to set
reasonable max frame rate versus video quality under the limited bandwidth.
GOP Control:
Defines the Intra/Inter-frame (I/P) ratio of this profile. For example, set the GOP to 30, then
the video stream will have one Intra-frame every 30 frames.
Note: When GOP value is lower, rising maximum bit rate value can improve video quality.
Multicast:
Enable/Disable Multicast function.
Multicast Video:
IP address and port for multicast video streaming of the selected profile.
Multicast Audio:
IP address and port for multicast audio streaming of the selected profile.
Note: Multicast port must be even number.
Time to live:
To define how many level of multicast router can be passed by multicast streaming.
Always Enable Multicast:
Multicast streaming is always enabled or by request.
Warning!!! To enable the multicast streaming, you shall make sure your Intranet does
support multicast function. Otherwise, your Intranet may occur network storm seriously.

ONVIF Profile

This page is 3MP device for ONVIF Profile setting, ONVIF profile1 is default streaming,
when user access camera by ONVIF protocol.
45