Honeywell 3MP User Manual page 32

Administrating the Device
DDNS:
To enable or disable the DDNS service here.
Server name:
Choose one of the built-in DDNS servers.
DDNS Host:
The domain name is applied of this device.
User name:
The user name is used to log into DDNS.
Password:
The password is used to log into DDNS.
Please refer to Appendix for more detailed information.
PPPoE
PPPoE: Stands for Point to Point Protocol over Ethernet
A standard builds on Ethernet and Point-to-Point network protocol. It allows your device
with xDSL or cable connects with broadband network directly, then your device can dial up
and get a dynamic IP address. For more PPPoE and Internet configuration, please consult
your dealer or ISP.
The device can directly connect to the xDSL, however, it should be setup on a LAN
environment to program the PPPoE information first, and then connect to the xDSL modem.
Power on again, then the device will dial on to the ISP connect to the WAN through the
xDSL modem.
The procedures are
Connect to a LAN by DHCP or Fixed IP
•
26