Connections; Midi In/Thru/Out; Usb To Computer; Pedals Sockets - Orla CDP31 Owner's Manual

CONNECTIONS

MIDI IN/THRU/OUT

The Midi THRU connector retransmits any data from the Midi IN directly to other Midi devices.
The Midi OUT connector transmits Midi data generated by the instrument to other Midi
instruments.
The Midi IN connector receives the Midi data from an external Midi device.

USB TO COMPUTER

It is possible to connect the instrument to a computer using the USB port located in the back panel
of the instrument and control the Midi parameters.

PEDALS SOCKETS

This is the connection for the pedal sets that can be used with the instrument.
If using the supplied Sustain Pedal connect it to Pedal Connection 1.
If the optional 3 Pedals pedal board is used connect the mono jack to pedal connection 1 and the
stereo jack to pedal connection 2.
LINE IN SOCKETS
There are two inputs (Left and Right) and they are used to send the audio signal of an external
instrument to the internal amplifier.
LINE OUT SOCKETS
There are two outputs (Left and Right) and they are used to send the audio signal out an external
amplifier, mixer console or recording equipment. To connect the instrument in Stereo to an external
amplification system connect both Left and Right outputs.
HEADPHONES
Two sets of Headphones can be plugged in for private practice and allow you to play without
disturbing anyone else or being disturbed by outside noise.
In the Stage Pro the sockets are located at the back of the instrument.
In the Grand 310 and CDP31 are located in the front of the instrument, below the hammer action
keyboard.
POWER ON/OFF
This switch turns the power to the instrument on or off.
DC IN SOCKET
This is the connection to power. Connect the adapter to this socket to power the instrument.