Chorus Effect; Touch Sensitivity; Transpose - Orla CDP31 Owner's Manual

If the REVERB effect is selected, it will stay switched ON even if a different sound is selected
while playing. At Power Up the REVERB effect will always be switched at ROOM reverb.

CHORUS EFFECT

This effect is similar to panning the sound between two speaker systems.
At Power Up the CHORUS effect will always be switched OFF.

TOUCH SENSITIVITY

Just like an acoustic piano, your instrument has an 88 note keyboard with velocit y control. This
means the level of the audio signal will be in proportion with the velocity of the key pressed. If you
play soft you will have a quiet sound, while if you play very hard you will have a much louder
sound.
The TOUCH SENSE button allows you to select 3 different touch sensitivity curves:
1 - HARD
2 - NORMAL
3 – SOFT
Select the Touch Sensitivity you desired by pressing the TOUCH SENSE button until the desired
Led is switched On. If no Led is switched On the keyboard will be set at NO TOUCH
SENSITIVITY.

TRANSPOSE

It is possible to Transpose the natural
The default C natural setting is indicated as C0 in the following table.
1 – Room
This setting requires the keys to be played quite hard to produce maximum
volume.
This setting produces standard keyboard response. This is the factory default
mode.
This setting allows maximum volume with lighter key pressure.
2 – Hall 3 - Theatre
key ( C ) of your instrument up or down.