Select The Split Point; Digital Reverb - Orla CDP31 Owner's Manual

- 264 is the number – according to the internal Sound List – of the Left Sound automatically
selected to Grand Piano and the sound is Accompaniment Strings 2.
When the LEFT sound is indicated on the display (remember – the instrument gives approximately
4 seconds to input data) the sound can be changed using the [/\][\/] buttons to select the desired
voice number according to the Voice List.
It is of course possible to directly digit the number of the new desired sound using the numeric
keypad buttons.
Press the [LEFT] button to switch this section ON or OFF.
NOTE When the BASS button and the LEFT button are selected On at the same time, when
playing chords in the Left part of the keyboard the Bass sound will be played in
ROOT mode and will play the fundamental note.

SELECT THE SPLIT POINT

The default position of the Split point is F#2 (equal to value 33 on the display) located below the
[BASS] and [LEFT] buttons.
The Split Point can be set to any other key as follows:
- Press and hold the [BASS] or [LEFT] button until the sound number starts blinking.
- Select now the new Split Point by pressing the desired key on the keyboard or by changing
the value on the display using the [/\][\/] buttons near the display.
- To set for example the new Split Point on the C2 Position change the value to 27.
The display will return to the normal display mode and the new Split Point is now set.

DIGITAL REVERB

The DIGITAL REVERB effect creates an acoustic effect similar to playing in different
environments. It is possible to select any one of three different Reverb types: