Usb Board/Audio Jack - HP Pavilion TouchSmart 14-b100 Maintenance And Service Manual

USB board/audio jack

Description
USB board (includes cable and audio-out/audio-in jack)
IMPORTANT:
and replacement.
Before removing the USB board, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the keyboard (see
6. Remove the top cover (see
7. Remove the hard drive (see
Remove the USB board:
NOTE: One side of the USB cable lies across the hard drive. It is disconnected during the hard
drive removal process.
1. Remove the screw (1) and gently lift the USB board (2) up.
2. Slide the USB board (3) out to remove it.
Reverse this procedure to install the USB board.
Make special note of each screw and screw lock size and location during removal
Battery on page
Keyboard on page
Top cover on page
Hard drive on page
42).
46).
50).
54).
Component replacement procedures
Spare part number
697902-001
57