Attaching/Detaching Implement - CanyCom CG431 Operator's Manual

5116M-0510-060E

Attaching/Detaching Implement

• Park machine on a level surface when attaching or detaching implement.
• Do not go under implement.
• Always release residual pressure of hydraulic components when detaching
implement, or oil under high pressure may leak and penetrate through skin and
cause injury upon contact.
• Hydraulic fluid is very hot right after use. Allow hydraulic fluid to cool before
detaching implement, or severe burns may result.
• Never turn implement switch on when quick couplers are detached. Hydraulic
components or plumbing can be damaged.
Quick Couplers
5116M-0510-090E
Maintenance
Rotor Axle (Right)
1. Grease rotor axle (right).
1. Park machine on a level surface.
2. Lower implement until it rests on the ground.
3. Detach quick couplers on hydraulic hoses.
-23-
5