Cutting System; Flail - CanyCom CG431 Operator's Manual

Cutting System

• Stop engine and remove ignition key when servicing.
• Allow machine to cool off before servicing. Engine and its ancillaries are very
hot after operation and may pose a burn hazard.

Flail

• Do not go under cutting rotor unit.
• When a flail is damaged, replace it and its pair immediately. Always replace
flails in pair. Damaged flail causes rotational imbalance and undue vibration,
which can damage machine.
• When replacing flails, replace all flails at once. If it is necessary to replace only
a part of flails, replace them in such a manner to keep left-to-right balance.
Failure to do so can cause undue vibration and damage to machine.
• Flails have sharp edges. When replacing flails, wear thick gloves or wrap the
flail with thick cloth and handle carefully.
Maintenance
-19-
5