Operation; Preparation; Pre-Start Up Inspection; Working - CanyCom CG431 Operator's Manual

4

Preparation

Pre-start up Inspection

Always perform an inspection before use.
Refer to Maintenance Schedule (page 13) for the inspection schedule and procedure.

Working

• Never place any part of body under implement shield when implement is
running. See implement's manual for safety information.
• Always tie string on safety switch to operator's body so that machine stops
when operator falls off machine.
• Do not allow bystanders to come near machine when working.
• Running implement can throw stones or debris and cause injuries and damages
to nearby people, animals, crops, buildings, automobiles, etc. Pay attention to
the safety of surroundings and plan ahead when working.
• Never attempt to work with implement shield open.
• When working, drive forward. Machine is intended to work while moving
forward, and this best prevents stones and debris from being thrown.
• Turn implement switch to [ON] only when working. Keep it in [OFF] position all
the other times.
• Never attempt to work on or near the edge of a ditch or bank. Shoulder of a
ditch or bank may collapse. Pay extra care after heavy rain or earthquake.

Operation

-8-