Translating Implement - CanyCom CG431 Operator's Manual

Implement Switch
5116M-0402-021E

Translating Implement

With this translation function, the entire implement can be translated to the right by 500mm
(19.7 in) at the maximum, allowing working on the edge of ditch or bank.
• Always make certain of the safety of your surroundings before translating
implement.
• Always lift up implement when translating. Translating rotor while it is resting
on the ground may cause damage.
Implement Lift Switch(Up)
5116M-0402-110E
Operation
Automatic
Implement Switch
Press and turn
Stop
On
Push to stop
5. Push and turn implement switch to [RUN].
6. Drive machine forward to cut.
NOTE
• If cutting load is high, reduce traveling
speed or cut in stages at different cutting
heights.
7. To stop implement, press implement switch;
it automatically returns to [stop].
1. Press implement lift switch [UP] to lift
cimplement off the ground.
-11-
4