Preparation; Operation - CanyCom CG431 Operator's Manual

Preparation

• Always wear protective footwear, long trousers, hardhat, safety glasses and ear
protection when operating or servicing the machine. Proper clothing will minimize
the chance of injury. Do not operate the machine if you have long hair, loose
clothing, or jewelry; all of which may get tangled in the moving parts. Do not
operate the machine barefoot or with open sandals.
• Prepare beforehand the working rules and procedures such as signaling and trafic
control for the work place. Following such rules will reduce the risk of accidents.
• Never handle fuel, lubricants or other flammable materials, service engine, or
recharge battery in the presence of fire or spark.
• Perform daily pre-startup inspection (see Preparation, page 8) before starting the
machine. Repair or replace damaged parts before starting the machine. Clean the
machine of cut grass or such refuse to avoid fire.

Operation

This mower is intended for brushcutting. It is intended to be used in combination with the
CG431 tractor. Use only the CG431 tractor or any other tractors that are certified specificly
for this mower. Use with any other tractor may adversely affect the performance or stability
of the machine and can cause damage or accident.
The stability of the machine is affected by the speed, rate of steering, terrain and load.
Always pay close attention to these factors or a loss of control or overturn could occur,
resulting in property damage, serious injury or death.
General Operation
• Do not operate the machine under the influence of alcohol or drugs. Do not operate
the machine when you are tired, ill, or not feeling well.
• Always check for obstacles before operating on new terrain.
• Before starting the engine and the moving machine, scan around your surroundings
and make sure all persons and other vehicles are a safe distance away from the
machine. Sound the horn to warn bystanders.
Safety
-3-
1