4 by 4 hdmi 4k uhd over cat 5e / 6 / 7 matrix with micro control system (47 pages)
Summary of Contents for Cypress CMLUX-4H4CAT
Page 1
CMLUX-4H4CAT 4 by 4 HDMI V1.3 over CAT 6 Matrix with IR Return Control Operation Manual CMLUX-4H4CAT...
Page 2
Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.
Safety Precautions Please read all instructions before attempting to unpack or install or operate this equipment, and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
1. Introduction This HDMI over CAT6 Matrix is a high performance equipment with remote control, IR blaster and receiver. It is compatible with HDMI v1.3 specifications, a cutting-edge technology which defines support for Deep Color (12 bits/color) video and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital audio.
5. Features HDMI 1.3, HDCP 1.1 and DVI 1.0 compliant Supports digital video formats in Deep Color Mode of up to 36 bits (12bits/ color) and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital audio HDMI input compensation, clock / phase adjustments, and jitter ...
7. Operation Controls and Functions 7.1 Front Panel POWER HDCP HDMI/DVI HDCP HDMI/DVI HDCP HDMI/DVI HDCP HDMI/DVI CMLUX-4H4CAT HDMI OUT HDMI V1.3 to CAT6 4X4 Matrix ① ② ③ ④⑤ ① . Remote control sensor. ② . Power switch & LED Indicator: This LED will illuminate when the power is turned on.
Page 9
2. When EDID is switched to STD, the unit will use its built-in EDID that supports: Video → 1080p 12-bit (max) supports xvYCC Audio → PCM 2CH 3. The EDID selection will only be activated after the unit is re-plugged and powered on.
HDMI OUT C. 5. Input Select for HDMI OUT D: Press 1, 2, 3 or 4 to select the desired input source for HDMI OUT D. 9. RS-232 Protocol 9.1 Pin Definitions CMLUX-4H4CAT Remote Control Console Definitions Definitions →...
9.2 Commands COMMAND ACTION POWER 00 Power Off (standby) POWER 01 Power On PORT 11 Output A select Input1 PORT 12 Output A select Input2 PORT 13 Output A select Input3 PORT 14 Output A select Input4 PORT 21 Output B select Input1 PORT 22 Output B select Input2 PORT 23...
9.3. IR Cable Pin Definitions IR Blaster IR Receiver ① Power 5V ① IR signal ② IR blaster signal ② Power 5V ③ IR blaster signal ③ Grounding ① ② ③ ① ② ③ Note: The frequency on both IR Receiver & Blaster can support 20~60KHz. 10.
11. Connection and Installation ° ° POWER OUTPUT OUTPUT OUTPUT Receiver OUTPUT CR-33 IR Blaster for all players For Play A Play A CAT 6 Cable For Play B Play B For Play C Play C HDMI Cable For Play D Play D CLUX-22HC CLUX-1CAT4H...
Need help?
Do you have a question about the CMLUX-4H4CAT and is the answer not in the manual?
Questions and answers