Ellington PAT64ABZC5 Installation Manual page 6

5. Fan Assembly. (cont.)
safety cable loop
wood
With the hanging bracket secured to the
ceiling
outlet box and able to support the fan, you are
joist
now ready to hang your fan. Grab the fan
wood screw
firmly with two hands. Slide downrod through
and washer
opening in hanging bracket and let hanging
ball rest on the hanging bracket. Turn the
safety cable
hanging ball slot until it lines up with the
hanging bracket tab.
WARNING: Failure to align slot in hanging ball
hanging bracket tab
with tab in hanging bracket may result in
hanging ball slot
canopy
serious injury or death.
Tip: Seek the help of another person to hold
the stepladder in place and to help lift the fan
up to you once you are set on the ladder.
motor housing
Find a secure attachment point (wood ceiling
joist highly recommended) and secure safety
cable. It will be necessary to use a heavy duty
wood screw, washer and lock washer (not
supplied) with the safety cable loop. If
necessary, adjust the loop at the end of the
safety cable. The loop at the end of the safety
cable should just fit over the threads on the
wood screw. Extra cable slack can be left in
ceiling area.
page 5