Ellington AZ52ABZ5 Installation Manual

Ceiling fans

Hide thumbs

Table of Contents

Quick Links

Download this manual

Installation Guide

For Models:

AZ52ABZ5

AZ52BNK5

AZ52MWW5

E206035

net weight of fan: 17.2 lb (7.8 kg)

READ THESE INSTRUCTIONS AND

SAVE THEM FOR FUTURE USE

Need help?

Do you have a question about the AZ52ABZ5 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ellington AZ52ABZ5

Page 1: Table Of Contents
READ THESE INSTRUCTIONS AND SAVE THEM FOR FUTURE USE Installation Guide For Models: AZ52ABZ5 Table of Contents: AZ52BNK5 Safety Tips. pg. 1 AZ52MWW5 Unpacking Your Fan. pg. 2 Parts Inventory. pg. 2 Installation Preparation. pg. 3 Hanging Bracket Installation. pg. 3 Fan Assembly.
Page 2: Safety Tips
SAFETY TIPS. WARNING: To reduce the risk of electrical shock, turn off the electricity to the fan at the main fuse box or circuit panel before you begin the fan installation or before servicing the fan or installing accessories. READ ALL INSTRUCTIONS AND SAFETY INFORMATION CAREFULLY BEFORE INSTALLING YOUR FAN AND SAVE THESE INSTRUCTIONS.
Page 3: Unpacking Your Fan
1. Unpacking Your Fan. Carefully open the packaging. Remove items from Styrofoam inserts. Remove motor housing and place on carpet or Styrofoam to avoid damage to finish. Do not discard fan carton or Styrofoam inserts should this fan need to be returned for repairs.
Page 4: Installation Preparation
3. Installation Preparation. blade edge To prevent personal injury and damage, ensure inches 7 feet that the hanging location allows the blades a (2.13 m) (76 cm) clearance of 7 feet (2.13 m) from the floor and 30 in (76 cm) from any wall or obstruction. This fan is suitable for room sizes up to 400 square 12 ft.
Page 5: Fan Assembly. Pgs
5. Fan Assembly. set screw hole set screw If you wish to extend the hanging length of your fan, you must remove the hanging ball from the 6-inch stop pin downrod provided to use with an extended downrod (sold separately). [If you wish to use the 6-inch downrod, please proceed to instructions following the dotted line below.] hanging ball...
Page 6 5. Fan Assembly. (cont.) safety cable loop With the hanging bracket secured to the outlet wood box and able to support the fan, you are now ceiling ready to hang your fan. Grab the fan firmly with joist wood screw two hands.
Page 7: Wiring
6. Wiring. white supply wire CAUTION: Be sure outlet box is properly grounded ground and that a ground wire (GREEN or Bare) is present. (green or bare) black supply wire Make sure all electrical connections comply with Local Codes or Ordinances and the National Electrical Code.
Page 8: Blade Assembly
8. Blade Assembly. Time Saver: Washers for blade screws can be set on each blade screw prior to installing blades. motor housing Locate 15 blade attachment screws and washers in hardware pack. Hold blade arm up to blade and align holes. Insert 3 blade attachment screws (along with washers) with blade attachment screws and washers...
Page 9: Testing Your Fan
10. Testing Your Fan. motor housing It is recommended that you test fan before finalizing installation. Restore power from circuit box and wall switch (if applicable). Test fan speeds with pull chain. Start at the OFF position (no blade movement). First pull will set the fan to HI. Second pull will set the fan to MEDIUM.
Page 10: Troubleshooting
Warranty. Troubleshooting. ELLINGTON LIMITED LIFETIME WARRANTY: ELLINGTON/LITEX INDUSTRIES, LTD. warrants this fan to the original household purchaser for indoor use under the following provisions: 1-YEAR WARRANTY: ELLINGTON/LITEX INDUSTRIES, LTD. will replace or repair any fan which has faulty performance Problem: Fan fails to operate.

This manual is also suitable for:

Az52bnk5 Az52mww5