Ellington WOD52ABZ5 Installation Manual
  1. Manuals
  2. Brands
  3. Ellington Manuals
  4. Fan
  5. WOD52ABZ5
  6. Installation manual

Ellington WOD52ABZ5 Installation Manual

Hide thumbs
1
2
3
4
5
6
7
8
9
Table of Contents

Advertisement

Quick Links

Installation Guide
For Models:
WOD52ABZ5
WOD52CS5
WOD52GV5
WOD52MBK5
WOD52WW5
LISTED
For
Wet Location
E192641
net weight of fan: 16.53 lb. (7.5 kg)
READ THESE INSTRUCTIONS
AND SAVE THEM FOR FUTURE USE

Table of Contents:

Wiring. pg. 6
Warranty. pg. 8
PRINTED IN CHINA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WOD52ABZ5 and is the answer not in the manual?

Questions and answers

Related Manuals for Ellington WOD52ABZ5

Summary of Contents for Ellington WOD52ABZ5

  • Page 1: Table Of Contents

    READ THESE INSTRUCTIONS AND SAVE THEM FOR FUTURE USE Installation Guide For Models: WOD52ABZ5 Table of Contents: WOD52CS5 Safety Tips. pg. 1 WOD52GV5 Unpacking Your Fan. pg. 2 WOD52MBK5 Parts Inventory. pg. 2 Installation Preparation. pg. 3 WOD52WW5 Hanging Bracket Installation. pg. 3 Fan Assembly.

  • Page 2: Safety Tips

    SAFETY TIPS. WARNING: To reduce the risk of electrical shock, turn off the electricity to the fan at the main fuse box or circuit panel before you begin the fan installation or before servicing the fan or installing accessories. READ ALL INSTRUCTIONS AND SAFETY INFORMATION CAREFULLY BEFORE INSTALLING YOUR FAN AND SAVE THESE INSTRUCTIONS.

  • Page 3: Unpacking Your Fan

    1. Unpacking Your Fan. Carefully open the packaging. Remove items from Styrofoam inserts. Remove motor housing and place on carpet or Styrofoam to avoid damage to finish. Do not discard fan carton or Styrofoam inserts should this fan need to be returned for repairs.

  • Page 4: Installation Preparation

    3. Installation Preparation. blade edge To prevent personal injury and damage, ensure inches that the hanging location allows the blades a 7 feet (76cm) clearance of 7ft. (2.13m) from the floor and 30in. (2.13m) (76cm) from any wall or obstruction. This fan is suitable for room sizes up to 400 square 12ft.

  • Page 5: Fan Assembly (With Downrod)

    5. Fan Assembly (with downrod). If you wish to extend the hanging length of your set screw set screw hole fan, you must remove the hanging ball from the stop pin 4in. downrod provided to use with an extended downrod (sold separately). [If you wish to use the 4in.

  • Page 6: Fan Assembly. Pgs

    5. Fan Assembly (with downrod). (cont.) With the hanging bracket secured to the outlet box and able to support the fan, you are now ready to hang your fan. Grab the fan firmly with two hands. Slide downrod through opening in hanging bracket and let hanging ball rest on the hanging bracket.

  • Page 7: Wiring

    7. Wiring. white supply wire ground (green or bare) CAUTION: Be sure outlet box is properly grounded black supply wire and that a ground wire (GREEN or Bare) is present. Make sure all electrical connections comply with Local from ceiling Codes or Ordinances and the National Electrical Code.

  • Page 8: Blade Assembly

    9. Blade Assembly. Time Saver: Washers for blade screws can be set on motor housing each blade screw prior to installing blades. Locate 15 blade attachment screws and washers in hardware pack. Hold blade arm up to blade and align holes. Insert 3 blade attachment screws (along with washers) with fingers first and then tighten blade screws securely with a Phillips screwdriver.

  • Page 9: Troubleshooting

    Return fan, shipping prepaid, to 2. Verify that reverse switch is set completely in Craftmade/Ellington. We will repair or ship you a either direction. replacement fan, and we will pay the return shipping cost.

This manual is also suitable for:

Wod52cs5Wod52gv5Wod52mbk5Wod52ww5

Table of Contents