A Message Is Displayed - Canon ip110 series Online Manual

A Message Is Displayed

This section describes some of the errors or messages.
Note
• A Support Code (error number) is displayed on the computer for some error or message. For details on
errors with Support Codes, refer to
Error Regarding the Paper Thickness Lever Is Displayed
A Message Confirming Using Composite Black Is Displayed
Writing Error/Output Error/Communication Error
Other Error Messages
The Inkjet Printer/Scanner/Fax Extended Survey Program Screen Is Displayed
Error Regarding the Paper Thickness Lever Is Displayed
The proper position of the paper thickness lever varies depending on the type of paper you are printing
on.
Check the error message that appears on the computer and adjust the position of the paper thickness
lever properly, then click OK.
A Message Confirming Using Composite Black Is Displayed
The black part is printed using color inks to produce composite black. If you continue printing with reduced
printing quality, click OK. If you cancel printing, click Cancel Printing and change the setting, then try
printing again.
For details on how to perform settings, see
Writing Error/Output Error/Communication Error
If the POWER lamp is off, make sure that the power plug is plugged in, then
Check1
turn the printer on.
While the POWER lamp is flashing, the printer is initializing. Wait until the POWER lamp stops flashing and
remains lit.
Support Code List.
Setting the Ink Usage
471
Control.