Canon iP110 Series Printer Turning on the printer 1. Open the rear tray cover. The paper output slot cover opens automatically. 2. Press the ON button to turn on the printer. The POWER lamp flashes and then remains lit. Note •...
Turning off the printer Press the ON button to turn off the printer. When the POWER lamp stops flashing, the printer is turned off. Important When you unplug the power cord after turning off the printer, be sure to confirm that •...
Printer Components Front View (1) print head cover Open to replace an ink tank or remove jammed paper inside the printer. (2) paper guide Align with the left side of the paper stack. (3) paper support Pull out fully to support paper loaded on the rear tray.
All lamps are shown lit in the above figure for explanatory purposes ON button – Turns the power on or off POWER lamp – Lights after flashing when the power is turned on (10) RESUME/CANCEL button - Cancels a print job in progress. Holding this button down lets you select maintenance options or printer settings.
Side View AC adapter connector Plug in the supplied universal AC adapter plug here. USB port Plug in the USB cable to connect the printer with a computer. > Important • Do not touch the metal casing. • Do not plug in or unplug the USB cable while printing.
Printer Troubleshooting You can check the status of the printer by the POWER and Alarm lamps. POWER lamp is off: The power is off. POWER lamp lights: The printer is ready to print. POWER lamp flashes: The printer is getting ready to print, or printing is in progress. ...
If an Error Occurs When an error occurs in printing such as the printer is out of paper or paper is jammed, a troubleshooting message is displayed automatically. Take the appropriate action described in the message. When an error occurs, the Alarm lamp flashes and a Support Code (error number) is displayed on the computer screen.
Support Code Corresponding to the Number of Alternate Flashes of the POWER Lamp and the Alarm Lamp Example of 2 times flashing: (A) Flashes (B) Goes off Number of flashes Cause Support Code 2 flashes Printer error has occurred. 5100 7 flashes Printer error has occurred.
Replacing an Ink Tank When remaining ink cautions or errors occur, the Alarm lamp will flash to inform you of the error. Count the number of flashes and take appropriate action. When you need to replace an ink tank, follow the steps below. 1.