Canon ip110 series Online Manual page 508

5100
Cause
Printer error has occurred.
Action
Cancel printing and turn off the printer.
Then confirm the following.
• Confirm that there are no materials (e.g. jammed paper) that is preventing the print head holder from
moving.
If any, remove the materials.
• Confirm that The print head lock lever is locked securely.
Push the right and left tabs of the print head lock lever until each clicks into place.
• Confirm that the ink tanks are installed properly.
Push an ink tank until it clicks into place.
After confirming the conditions above, turn on the printer again.
If the problem is not resolved, contact the service center.
Important
• When you clear the jammed paper or protective material that is preventing the print head holder from
moving, be careful not to touch the components inside the printer. The printer may not print out
properly if you touch it.
508