Aligning The Print Head - Canon ip110 series Online Manual

Aligning the Print Head

If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head
position.
Note
• If the remaining ink level is low, the print head alignment sheet will not be printed correctly.
ink tank whose ink is low.
• If you run out of the supplied paper (Matte Photo Paper MP-101) or the specified Canon genuine paper
is not immediately available or obtainable, you can use plain paper and adjust the print head position
manually from a computer.
Aligning the Print Head Position Manually from Your Computer
You need to prepare: a sheet of A4 or Letter-sized Matte Photo Paper MP-101
1. Make sure that the power is turned on.
2. Load a sheet of supplied paper or A4 or Letter-sized Matte Photo Paper MP-101 in the rear
tray.
Load the paper WITH THE PRINT SIDE (WHITER SIDE) FACING YOU in the rear tray.
3. Set the paper thickness lever to the right.
Loading Paper
4. Hold down the RESUME/CANCEL button until the POWER lamp flashes four times, then
release it immediately.
The print head alignment sheet will be printed and the print head position will be adjusted automatically.
Do not perform any other operations until the printer completes the printing of the print head alignment
sheet. This takes about 4 minutes.
Note
• If the automatic adjustment of the print head position has failed, the Alarm lamp flashes.
If an Error Occurs
• If the print results are still not satisfactory after adjusting the print head position as described above,
adjust the print head position manually from the computer.
Aligning the Print Head Position Manually from Your Computer
138
Replace the