Canon ip110 series Online Manual page 448

1. Roll up the paper in the opposite direction to the paper curl as shown below.
2. Check that the paper is now flat.
We recommend printing curl-corrected paper one sheet at a time.
Note
• Depending on the media type, the paper may be smudged or may not be fed properly even if it is not
curled inward. In such cases, follow the procedure described below to curl the paper outward within 0.1
inch / 3 mm (B) in height before printing. This may improve the print result.
(C) Printing side
We recommend printing paper that has been curled outward one sheet at a time.
Is the paper thickness lever set properly?
Check4
Adjust the position of the paper thickness lever properly according to the type of paper you are printing on.
For details on how to load paper or the position of the paper thickness lever:
Loading Paper
Depending on the printing content, the printing surface may become scratched or the corners or edges of the
paper may become smudged even for the types of paper to set the lever to the right. In this case, set the paper
thickness lever to the left.
448