Front Wheel - PGO PMX Sport 50 Service Manual

F. Front wheel:
1.Remove the locking nut of front wheel on the right side.
2.Pull out he axle of front wheel Remove the spacer ring and take off the
gear sets of the speedometer.
3.Remove the front wheel assembly.
4.To assemble, please reverse the procedures of
dismantling.
Locking torque:M10:3.0~4.0kg- m
Note:1.Put the movement-stop block of the speedometer gear assy above extruded block
Of the front fork.
2.Please put the grease onto the gear sets of the speedometer before assembling.