Cleaning Air Cleaner; The Final Reduction Mechanism Oil - PGO PMX Sport 50 Service Manual

Table of Contents

Advertisement

(3)Cleaning air cleaner

1.Remove air cleaner cover
2.Take out the air cleaner filter
3.Clean the filter by the compressor air
4.Assemble the air cleaner by reversing above procedure
Note: Do not start the engine
When the air cleaner is
Not installed

(4)The final reduction mechanism oil

1.Change the oil in the gear box:
a. Turn off the engine after warm up.
b. Put a bowl under the engine.
c. Remove the draining bolt and
Filler bolt to drain the gear
oil off.
d. Lock the draining bolt before
refill 90c.c. gear oil and
then lock the filling bolt.
e. Locking torque:1.8kg- m
Note: Be sure the crankcase, tire or wheel are cleaned if there is grease/oil on it

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pmx sport 110

Table of Contents