Disconnect The Negative Cable Firstly, Then Positive Cable; Screwing Out The Four Screws Of The Step Plate; Screwing Out The Screws Of Step Floor & Lo Wer Mudguard - PGO PMX Sport 50 Service Manual

13.Disconnect the negative cable firstly, then positive cable

àtake out the battery.

14.Screwing out the four screws of the step plate

àtake off the step plate.
15.Screwing out the screws of step floor & lo wer mudguard
àtake off the step floor & lower mudguard.
Locking torque:
M6:0.7-1.1kg- m
M5:0.35-0.5kg- m
Note: Pay attention not to clamp or scraping the cables by
the plastic parts when assembling.