Taski ergodisc 1200 Instructions Of Use page 13

The machine's maintenance is a pre-condition for trouble-free running and a long
life.
Symbols:
◊ = = After use, ◊◊ = Every week, ◊◊◊ = Every month
Activity
Check the motor ventilation on collection of dust and clean when
necessary.
Empty spray unit and rinse with warm water
Clean the pad and let it dry
Wipe down the machine with a moist cloth
Service intervals
TASKI machines are build to the highest quality standards . This is supported by
internationally regonized quality control procedures. Electrical and mechanical
parts are subject to wear or aging if used for long periods of time.
t functional safety and operational readiness, a service must be carried out
after 250 working hours or at least once a year.
Under rough or special conditions and / or insufficient maintenance, shorter
intervals will be required.
Service centre
Should you contact us due to a malfunction or for placing an order, please always
state the type, description and the serial number of your machine.
You can find this information on the name plate of your machine, and the address
of your nearest TASKI partner can be found on the last page of these operating
instructions.
13
◊ ◊◊ ◊◊◊
page
5
11
11
12