Other Messages - Canon iPF850 series Basic Manual

iPF850 Series

Other Messages

Other Messages
GARO Wxxxx (x represents a number) .......................................................................................................... 161
ERROR Exxx-xxxx (x represents a letter or number) ...................................................................................... 161
Hardware error. xxxxxxxx-xxxx (x represents a letter or number) .................................................................... 161
Top cover is open. ......................................................................................................................................... 161
Prepare for parts replacement. ...................................................................................................................... 162
Parts replacement time has passed. ............................................................................................................. 162
Unknown file. ................................................................................................................................................ 162
Multi-sensor error .......................................................................................................................................... 162
No Roll Unit. .................................................................................................................................................. 146
GARO Wxxxx (x represents a number)
GARO Wxxxx (x represents a number)
Cause
There is a problem with the print job.
ERROR Exxx-xxxx (x represents a letter or number)
ERROR Exxx-xxxx (x represents a letter or number)
Cause
An error requiring service may have occurred.
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
Hardware error. xxxxxxxx-xxxx (x represents a letter or number)
The last portion of roll paper was used during a print job. The paper
was not advanced because the trailing edge is taped to the roll.
Fastening tape or the Belt Stopper has not been removed inside the
Top Cover.
An error requiring service may have occurred.
Top cover is open.
Top cover is open.
Cause
The printer has detected that the Top Cover is
open.
Basic Guide
Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired printing results.
Write down the error code and message, turn off the printer, and contact your Can-
on dealer for assistance.
Cause
Open the Top Cover fully, remove any foreign objects, and close the Top Cover
again.
Corrective Action
Corrective Action
Corrective Action
Turn off the printer and remove the roll from the printer be-
fore restoring power.
Turn off the printer, open the Top Cover and remove the
tape or the Belt Stopper before restoring power.
Turn off the printer and wait at least three seconds before
restoring the power.
If the message is displayed again, write down the error code
and message, turn off the printer, and contact your Canon
dealer for assistance.
Corrective Action
GARO Wxxxx (x represents a number)
161