Printing Does Not Start - Canon iPF850 series Basic Manual

iPF850 Series

Printing does not start

Printing does not start
The Data lamp on the Control Panel does not light up ................................................................................... 123
The printer does not respond even if print jobs are sent ................................................................................ 123
Ink Filling.. is displayed .................................................................................................................................. 124
The display screen indicates Agitating ........................................................................................................... 124
The Data lamp on the Control Panel does not light up
The Data lamp on the Control Panel does not light up
Cause
The printer is not Make sure the power cord is securely plugged in, all the way. Press the Power button to turn on the printer.
on.
The target printer •
was not selected
when printing.
•
The print job is •
paused.
1.
2.
3.
1.
2.
•
1.
2.
3.
4.
The printer does not respond even if print jobs are sent
The printer does not respond even if print jobs are sent
Cause
In the Control Panel menu, Pause
Print is On.
In the Control Panel menu, Use
USB or Use Ethernet is set to Off.
You have selected Save in mail
box in Output Method on the print-
er.
Print jobs are pending.
The Stacker is not ready.
The Stacker position is incorrect.
Basic Guide
In Windows, select the printer by clicking Select Printer or Printer in the printing dialog box and try printing
again.
In Mac OS, open the dialog box of the printer driver, select the printer from the list of Printer, and try print-
ing again.
In Windows, restart the print job as follows.
Click the printer icon in the Devices and Printers window.
Click See what's printing to open a window.
Click Pause Printing in the Printer menu to clear the check box.
Note, depending on the version, restart the print job as follows.
Right-click the printer icon in the Printers and Faxes (or Printers) window.
Click Resume Printing in the menu.
In Mac OS, restart the print job as follows.
Click Print & Scan. (This is identified as Printers & Scanners or Print & Fax in other versions of Mac
OS.)
Choose the printer.
Click Open Print Queue to open a window.
Click Resume Printer (or Resume).
Set Pause Print to Off.
(See "Pausing Printing.")
Set Use USB or Use Ethernet to On.
(See "Menu Settings.")
Print the job saved on the printer's hard disk.
(See "Printing Saved Jobs.")
Manage the jobs on hold and print as needed.
(See "Managing Pending Jobs (Printing or Deleting Jobs on Hold).")
If "Stacker not ready." or "Cutting Mode not Automatic." is displayed on the Control Panel
Display Screen, clear the error.
(See "Stacker not ready..")
(See "Cutting Mode not Automatic..")
To print using the Stacker, install the Stacker on the printer correctly.
The Data lamp on the Control Panel does not light up
Corrective Action
Corrective Action
User's Guide
➔
User's Guide
➔
User's Guide
➔
P.149
➔
P.150
➔
User's Guide
➔
123