Canon iPF850 series Basic Manual page 32

Installing and Removing the Stacker On the Printer
4
Hold the Stacker outer frame (c) and push the
Stacker straight in towards the printer so that the
triangle markings (a) on the left and right side of
the Stacker stand are aligned with the points of the
triangle markings (b) on the Docking unit left and
Docking unit right.
Important
5
Turn the Stacker on and check that both of the
lamps on the Stacker are lit.
If only one of the lamps on the Stacker is lit, the
Stacker might not be installed correctly on the print-
er. Check that the Stacker is installed at the correct
position in step 4.
6
Lock the two front casters on the Stacker stand.
32
•
Always push the Stacker in straight. If you do not push it in straight, the printer or stacker may be dam-
aged.
a
b
c
O N
iPF850 Series
a
b
Basic Guide