Canon iPF850 series Basic Manual page 136

HP-GL/2 jobs are printed in monochrome (or color)
HP-GL/2 jobs are printed in monochrome (or color)
HP-GL/2 jobs are printed in monochrome (or color)
Cause
The Color Mode setting in
the Control Panel menu is
incorrect.
Printed colors of lines are inaccurate during HP-GL/2 printing
Printed colors of lines are inaccurate during HP-GL/2 printing
Cause
AdjustFaintLines is On in the Con-
trol Panel menu.
HP-GL/2 jobs are printed 6 mm larger than specified
HP-GL/2 jobs are printed 6 mm larger than specified
The page size of the HP-GL/2 print job, as created in the source application, is
incorrect.
HP-GL/2 jobs are printed at maximum size, even if a standard size is specified
HP-GL/2 jobs are printed at maximum size, even if a standard size is specified
The page size of the HP-GL/2 print job, as created in
the source application, is incorrect.
HP-GL/2 printing takes a long time
HP-GL/2 printing takes a long time
Large print jobs with a lot of data take longer to print.
A job was printed when Input Resolution in the Con-
trol Panel menu was set to 600dpi.
The printer stops when printing a HP-GL/2 job (the carriage stops moving)
The printer stops when printing a HP-GL/2 job (the carriage stops moving)
The printer is analyzing the print job.
A job was printed when Input Resolution in the Con-
trol Panel menu was set to 600dpi.
136
Check the Color Mode setting in the Control Panel menu.
(See "Menu Settings.")
However, for optimal Printhead performance, the printer consumes trace amounts of color ink even
when Monochrome is selected as Color Mode.
Setting AdjustFaintLines to Off in the Control Panel menu may help produce the expected
results. However, lines in some colors may appear broken.
Cause
Cause
Cause
Cause
Corrective Action
User's Guide
➔
Corrective Action
In the Control Panel menu, set Oversize to Off.
(See "Menu Settings.")
Set Detect img size to Command priority or Detected size in the Control
Panel menu.
(See "Menu Settings.")
User's Guide
➔
Set Conserve Paper to On in the Control Panel menu.
(See "Menu Settings.")
User's Guide
➔
Please wait a while until printing is finished.
In the Control Panel menu, set Input Resolution to 300dpi and print
again.
(See "Menu Settings.") User's Guide
➔
Please wait a while until printing is finished.
In the Control Panel menu, set Input Resolution to 300dpi and print again.
(See "Menu Settings.") User's Guide
➔
Corrective Action
User's Guide
➔
Corrective Action
Corrective Action
Corrective Action
iPF850 Series
Basic Guide