PARTS REMOVAL FOR CLEANING/SANITIZING
Single Evaporator Ice Machines.
A
B
A. Remove the water curtain
•
Gently flex the curtain in the center and remove it
from the right side.
•
Slide the left pin out.
B. Remove the water trough
•
Depress tabs on right and left side of the water
trough.
•
Allow front of water trough to drop as you pull
forward to disengage the rear pins.
C. Remove the water level probe
•
Pull the water level probe straight down to
disengage.
•
Lower the water level probe until the wiring
connector is visible.
•
Disconnect the wire lead from the water level
probe.
•
Remove the water level probe from the ice
machine.
50
D
C
E
Part Number STH026 2/12
O f f
O n / O f f M o d e
[
!
]