Manitowoc QuietQube Indigo Series Technician's Handbook page 91

Event Log Detail
E-Log Display Text Error Description
Long Freeze
E01 Long Freeze
Long Harvest
E02 Long Harvest
Power Supply (Event Log only -
E03 Power Loss
No Alarm)
Air Condenser High temp, or
Hi Cnd Temp or
E04 water Condenser High
Wtr Cnd Fault
temperature
E05 HPC Fault High Pressure Cutout (HPC)
E06 Spare
Starving Evaporator for single
Starving TXV
E07
TXV or low on charge
TXV malfunction in dual circuit/
TXV Fault
E08
single evaps (TXV Fault)
Flooding evaporator for single
Flood Evap 1
E09 circuit single evaporator (flooding
evap)
Flooding evaporator for dual TXV
Flood Evap 2
E10 dual circuit / single evaporator
(Flooding Evap)
Detail Event Log Service Definition
Definition
6 consecutive 60 Minute Freeze cycles = shut down and flash the SL#1 light on board
3 consecutive - 3.5 Minute Harvests logs SL#2 in memory, but runs until 500 long harvest cycles occur.
When power is interrupted to the ice machine the control board will log the event in the ELOG and
stamp the loss of power on power-up.
1). Liquid Line Temperature too High for Self-contained Air Cooled Ice machine = Air Cooled
Condenser Fault
2). Liquid Line Temperature too High for Self-contained Water Cooled ice machine = Water Cooled
Condenser Fault
The high pressure cutout switch (HPCO) opened
10 consecutive occurrences where the Difference of the Average evaporator inlet (T3) and outlet (T4)
is greater than 12°F (ELOG-E07)
10 consecutive occurrences where the Difference of the Average evaporator inlet (T3) and outlet (T4)
is greater than 12°F (ELOG-E07)
During the first 6 minutes of the freeze cycle, the compressor discharge line temperature average (T2)
fell below the average temperature of the 6 previous cycles.
During the first 6 minutes of the freeze cycle, the compressor discharge line temperature average (T2)
fell below the average temperature of the 6 previous cycles.