Pride Jazzy 1113 Owner's Manual page 38

On/Off Key
The on/off key turns the system on and off.
WARNING! Unless faced with
an emergency situation, do
not use the on/off key to stop
the chair. This will cause the
power chair to stop abruptly.
WARNING! Always turn the
p o w e r o f f w h e n y o u a r e
s t a t i o n a r y
unexpected movement.
Mode Key (Speed Settings)
The mode key controls the speed settings. The
Remote Plus speed settings range from 1 to 5.
Typically, the slowest speed setting is 1 and the
fastest speed setting is 5. The settings are indi-
cated by the number of lights that are lit on the
speed setting indicator.
NOTE: The speed settings are preset at the
factory. If your authorised Pride Provider
changes the order of these settings, please
make note of these changes. Contact your
authorised Pride Provider for more information.
To select a speed setting:
1. Press the on/off key to power on the
controller.
2. Press the mode key once.
3. To increase chair speed, push the joystick to the right. Each time you push the joystick, you will increase the
speed setting in the speed setting indicator.
4. To decrease chair speed, push the joystick to the left. Each time you push the joystick, you decrease the speed
setting in the speed setting indicator.
5. Once you select the desired speed setting, press the mode key once to keep the setting or push the joystick in
the forward or reverse direction. The chair will resume operation at the selected speed.
NOTE: We recommend that the first few times you operate your power chair, you have your speed on
the slowest setting until you become familiar with your new power chair.
Horn Key
The horn key activates the horn.
38
V I I . O P E R A T I O N
t o p r e v e n t
Figure 38. Remote Plus Keypad
www.pridemobility.com Jazzy 1113