Pride Jazzy 1113 Owner's Manual page 23

V . C O M F O R T
3. Lift the armrest until it is perpendicular to the floor and
loosen the setscrew. See figure 21.
4. Slide the controller out of the armrest.
5. Loosen the setscrew in the other armrest.
6. Slide the controller into the other armrest.
7. Tighten the setscrew to secure the controller.
8. Use a wire tie to secure the controller cable to the armrest.
Footrest Height
The footrest height is easily adjusted to one of six different
heights in 2.5 cm increments.
To raise or lower the footrest:
1. Remove the footrest mounting hardware. See figure 22.
2. Raise or lower the footrest to the desired height.
3. Reinstall the footrest mounting hardware and tighten.
Footrest Angle
The footrest angle is easily adjusted to several positions. See
figure 23.
To adjust the footrest angle:
1. Flip up the footrest and locate the setscrew. See figure 23.
2. Turn the setscrew clockwise to lower the front of the
footrest .
3. Turn the setscrew anticlockwise to raise the front of the
footrest.
Jazzy 1113
A D J U S T M E N T S
Figure 22. Footrest Height Adjustment
Figure 23. Footrest Angle Adjustment
www.pridemobility.com
FOOTREST MOUNTING
HARDWARE
SETSCREW
23