Pride Jazzy 1113 Owner's Manual page 26

To install the battery well frame:
1. Face the rear of the unit and hold the battery well frame
so that the "belly" of the well hangs downward.
2. Position the notches on the front of the battery well frame
onto the locating pins on the bottom bar of the front frame.
See figure 28.
3. Fit the notch on either side of the rear of the battery well
frame onto the locating pin on the right frame assembly
and onto the locating pin on the left frame assembly.
4. Make certain that the locking mechanisms snap securely
into place.
To install the battery cases:
1. Place the front battery box (with the battery inside) into
the front end of the battery well frame.
NOTE: Make certain that the battery connectors are
facing toward the center.
2. Place the rear battery box (with the battery inside) into
the back end of the battery well frame.
3. Make certain that none of the wiring harnesses or cables
are pinched between the battery or the motor controller
box and the frame.
4. Connect the battery connectors from the front and rear
battery boxes to the electronics tray. Push the connector
firmly and fully into the socket. See figure 6.
5. Reconnect the left and right motor connectors to their
sockets located on the left and right frame assemblies.
Be certain to match the left connector to the left motor
and the right connector to the right motor (the connectors
are labeled left and right). See figure 6.
To install the seat:
1. Pick up the seat by the frame itself (not by the armrests)
and slide the locating pins near the back of the frame into
the matching slots on the left and rear seat post mounts.
2. Slide the pins to the back of the slots. It may be necessary
to wiggle the seat slightly from side to side to seat the pins
firmly at the back of the slots.
3. Push the front of the seat frame down until both the left
and the right frame sides lock into the front seat post
mounts. See figures 29 and 30.
26
V I . A S S E M B L Y
www.pridemobility.com
LOCATING PINS
Figure 28. Front Frame Locating Pins
Figure 29. Seat Installation
Figure 30. Locking the Seat Frame
Jazzy 1113