Renault Lodgy Driver's Handbook Manual page 76

STOP AND START
function (2/3)
Preventing the engine from
standing by
In certain situations, such as negotiat-
ing a crossroads for instance, it is pos-
sible (with the system activated) to keep
the engine running so as to be ready to
move off quickly.
Automatic or sequential gearbox
Keep the vehicle stationary without
pressing too hard on the brake pedal.
Manual gearbox
Keep the clutch pedal pressed right
down.
To fill up with fuel, the engine must
be stopped (and not on standby):
always stop the engine (please see
"Starting, stopping the engine").
2.6
ENG_NU_975-8_X92_Dacia_2
Jaune Noir Noir texte
Conditions for coming out of
engine standby
For automatic or sequential gear-
box:
– the brake pedal is released, position
D engaged or,
– the brake pedal is released, position
N engaged and the handbrake off, or
– the brake pedal is pressed again,
with position P engaged or position
N engaged with the handbrake ap-
plied, or
– position R is engaged or,
– the accelerator pedal is pressed.
For manual gearboxes:
– the gearbox is in neutral and the
clutch pedal is slightly depressed, or
– the engine is in gear and the clutch
pedal is pressed right down.
Deactivate the Stop and
Start function for any opera-
tion performed in the engine
compartment.
Fonction Stop and Start (X92 - Dacia)
Conditions preventing the
standby of the engine
Certain conditions prevent the system
from using the engine standby function,
including when:
– reverse gear is engaged;
– the bonnet is not locked;
– the outdoor temperature is too low
or too high (less than around 0 °C or
higher than around 30 °C);
– the battery is not sufficiently
charged;
– the engine temperature is too low;
– interruption due to the emission
control system;
or
– ...
The warning light
instrument panel to indicate that engine
standby is not available.
ENG_UD38132_1
appears on the