Using The Sound Menu - Hisense HL55T36PZL User Manual

Changing the TV Settings

Using the Sound Menu

SOUND
Sound Mode
Equalizer
Balance
Auto Volume
SPDIF Output
Lipsync
■ Sound Mode - Press [◄/►] to select between 5 different pre-adjusted sound modes:
Standard,Music,Movie,Speech and User(configurable mode). The User mode preserves your preferred
sound settings after using the Equalizer available under the Sound submenu.
■ Equalizer - Set the users' mode of sound, press [◄/ ►] button to select the sound component of 120HZ,
500HZ, 1.5KHZ, 5KHZ, and 10KHZ.
Press [▲/▼] button to weaken or enlarge the sound to the proper value.
The sound Equalizer can also be easily configured for most frequent situations by pressing the [SOUND]
button on your remote controller. Preset settings are provided for User, Music, Standard and Speech
conditions. Standard mode delivers a flat frequency response, which preserves the natural characteristics of
the original sound. In Music mode the extremes of low and high frequencies are accentuated to enhance
musical instrument reproduction. The opposite effect is accomplished in Speech mode where very low and
high frequencies are attenuated to improve the reproduction and intelligibility of the human voice.
■ Balance – Adjusts the volume from the left and right speakers.
■ Auto Volume: auto adjust the sound.
■ SPDIF Output –Set the SPDIF Output mode:Auto,PCM,AC3.
■ Lipsync – Allows very subtle adjustments between the syncing of sound and vision, You can select 1 to10.
Usually this is set to off.
Standard
0
Off
AC3
Off
Press [Menu] to open the main menu.
Press [ / ] to select Sound, then press [ /OK] to
enter the Sound menu.
Press [ / ] to select an option.
Press [ / ] to adjust the option or press [ /OK] to
enter the submenu.
Press [Menu] to return the up menu.
Press [Exit] to exit.
23