Changing The Tv Settings; Using The Channel Menu - Hisense V88 Series User Manual

Changing the TV Settings

Using the Channel Menu

Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Program Edit
Select
■ Auto Tuning
This is the easiest and most effective way to install all channels available in your area automatically.
-In both the Analog and Digital signal source
● Press [▲/▼] to select Auto Tuning.
● Press [OK] start an automatic search, and this will memorize all the available channels.
Auto Tuning will take a few minutes; please wait until it has finished.
■ DTV Manual Tuning
-in Digital signal source
Digital channel numbers are different to the existing analog channel numbers; please contact the broadcaster in
your state for the correct number.
● Press [▲/▼] to select the DTV Manual Tuning, then press [OK] to enter DTV Manual Tuning menu
● Press [◄/►] to select a channel then press [OK] to search.
■ ATV Manual Tuning
-In Analog signal source
Manual Install is only needed when analogue channels are not found under an automatic tune.
● Press [▲/▼] to select ATV Manual Tuning, then press [OK] to enter ATV Manual Tuning menu.
● Press [◄/►] to select a channel.
● Press [▲/▼] to select Search then press [◄/►] to begin tuning.
● Press the red button to save the channel.
NOTE: System setting for Australia is BG.
■ Fine tuning channels
Under poor reception conditions, or when receiving analogue signals from distant TV stations, the picture quality
might be improved by using the Fine Tune option in the ATV Manual Tuning submenu.
● Select Fine Tune and to adjust the image using [◄/►]. (Applicable for Analogue transmission only)
Channel
Conf irm Ex it
● Press [Menu] to open the main menu.
● Press [◄/►] to select Channel, then press [▼/OK] to
enter the Channel menu.
● Press [▲/▼] to select an option.
● Press [►/OK] to enter the submenu.
● Press [Menu] to return the up menu.
● Press [Exit] to exit
18 18