Using The Sound Menu - Hisense 43M3000 User Manual

2.3

Using the Sound Menu

The sound settings allows the user to optimize the
output audio sounds of the TV.
Sound Mode Select a preset sound mode to suit the type of content you are listening to.
Apply Sound
Adjust current sound mode to apply to all source or just current source.
Mode
Tune the audio settings and quality of the TV.
• Headphone Mode: Change the way audio is sent through the type of device that's
• Headphone Volume: Independently adjust the volume of audio out devices.
• Digital Audio Out: Select the digital audio output format that best suits the audio
• Digital Audio Delay: Adjust the digital audio output delay time to sync sound from
Advanced Audio
• Lip Sync: Synchronize the displayed image with the audio output.
Settings
• Balance: Adjust the left and right speaker strength to optimize audio for a specific
• Equalizer: Boost the volume at different frequencies.
• Audio Type: You can select Normal or Visually Impaired.
• Voiceover Out: You can select All, Speaker or Headphone.
• Voiceover Volume: Adjust the Voiceover Volume. (Only available when Audio
• TV Speaker: Disable TV speaker when you are using sound bar, ARC or any
Restore Default
Restore all of the audio settings in current audio mode to the factory default values.
Audio Settings
Menu
connected to your TV Audio Out port.
device type. For example, choose RAW (which is uncompressed audio in RAW
form) if you have 5.1 Channel Surround Sound Speaker set up. Choose PCM if
you have an amplifier that does not support Dolby Digital technology.
an external speaker with the images on the TV.
location.
Type is Visually Impaired)
other external audio amplifier.
Setup
Picture
Sound Mode
Sound
Apply Sound Mode
Channel
Advanced Audio Settings
Network
System Restore Default Audio Settings
About
16