Step 5 Proceed Through The Screen Setup Menu - Hisense LASER TV 100L5H Quick Start Manual

STEP 5 Proceed through the Screen
Setup Menu
PROJECTION MODE
If you need to flip the image over top-to-bottom and/or left-
to-right, select the Projection Mode and press the UP/DOWN
buttons.
AUTOMATIC GEOMETRIC CORRECTION
Before you use Automatic Geometric Correction function,
ensure that the Laser TV and your mobile device are connected
to the same wireless network.
1. Adjust the Laser TV position by using the levelling feet as
needed, ensure the frame of the screen is located inside the
rectangular border.
2. Press the OK button on your remote to continue.
3. Scan the QR Code with your mobile device to begin
automatic geometric correction. When the app loads, the
Laser TV will display an alignment grid.
Alignment grid
4. Click "+" on your mobile device to take a photo of the entire
screen and image. For best results, stand about 10 feet away
from the screen and use landscape mode.
5. Click "Upload" on your mobile device to complete the
automatic geometric correction.
NOTE:
• Please ensure you are standing in front of the screen to take
the photo, no deviation of more than 25° from the center of
the screen.
• Please ensure the whole Laser TV screen is fully visible on
the photo, including the Frame of the display.
• Please ensure all the 16 points of the grid on the screen are
all in focus when taking the photo.
• Please ensure the Laser TV screen image must take up at
least 60% of the overall photo size for correct geometric
correction.
GEOMETRIC CORRECTION
1. Select a point for adjustment using the UP/DOWN/LEFT/
RIGHT buttons. Adjust eight main points at the corners and
midpoints .
2. Adjust the position of the point by pressing the UP/DOWN/
LEFT/RIGHT buttons, then press the Back button to view and
select other points. Your changes will apply automatically.
17
Press to adjust the selected
OK
point