Changing the TV Settings
Using the Channel Menu
CHANNEL
Tuning Type
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Program Edit
Signal Information
■ Tuning Type
● Press [▲/▼] to select the Tuning Type.
● Press [◄/►] to select DTV+ATV,DTV,ATV.
■ Auto Tuning
This is the easiest and most effective way to install all channels available in your area automatically.
-In both the Analog and Digital signal source
● Press [▲/▼] to select Auto Installing.
● Press [OK] start an automatic search, and this will memorize all the available channels.
Auto Tuning will take a few minutes; please wait until it has finished.
■ DTV Manual Tuning
-In Digital signal source
Digital channel numbers are different to the existing analog channel numbers; please contact the broadcaster in
your state for more information.
● Press [▲/▼] to select the DTV Manual Tuning, then press [OK] to enter DTV Manual Tuning menu.
● Press [◄/►] to select a channel then press [OK] to search.
■ ATV Manual Tuning
-In Analog signal source
Manual Install is only needed when analogue channels are not found under an automatic tune.
● Press [▲/▼] to select ATV Manual Tuning, then press [OK] to enter ATV Manual Tuning menu.
● Press [▲/▼] to select search ten press [◄/►] to being tuning.
● Storage - you can select the channel 1......100 .
● Colour System - you can select Colour System PAL,Colour System NTSC,Colour System SECAM.
● System - you can select System BG,System I,System DK,System L.
● Current CH - you can select Current CH 1 to Current CH 100.
● Search - Auto search the channel.
● Fine-Tune -Fine adjusts frequency to achieve a perfect effect.
● Press the red button to save the channel.
NOTE: System setting for Australia is B.
Press [Menu] to open the main menu.
Press [ / ] to select Channel, then press [ /OK] to
DTV+ATV
enter the Channel menu.
Press [ / ] to select an option.
Press [ /OK] to enter the submenu.
Press [Menu] to return the up menu.
Press [Exit] to exit
20