Table of Contents
Advertisement
Assembly
The treadmill has been assembled and tested at the factory,
so you shouldn't have any problem putting all the parts
together. Components are designed to fit together, and only
basic tools are required for the assembly process. Inside the
box you will find a tool pack (Allen key, screwdriver, spanner
nuts and bolts) which will make easy-peasy to assemble
the treadmill. All you need to do is add the console unit to a
running deck by a pair of frames.
Follow these easy steps:
1.
Connect the cable placed on the right hand side of
the running deck with the vertical frame bar. Only one
vertical frame will have the power lead inside.
2.
To secure the uprights to the deck use two M8x15 bolts
with two flat washers. DO NOT tighten fully at this stage.
Now secure two M8 x15 bolts with two arc washers to
the front side of the uprights. Repeat the process on the
other upright.
3.
Insert the console into the upper end of the vertical
frame bars.
4.
Connect the control wire on the right hand side of
the console and the handrail through the plastic clip
provided, then push the excess wire into the handrail
frame. DO NOT trap or squeeze the wire.
5.
Now tighten all bolts and fixings securely.
6.
Now remove the shipment protection bracket.
7.
Adjust the pads under the running deck and keep the
treadmill in a horizontal position.
8.
Level the treadmill.
9.
Insert the safety key.
10. Plug the treadmill into the wall outlet and start
enjoying the exercise!
Shock and electrocution hazard!
Connect unit to an earthed outlet.
Do not use voltage adapter or extension cable.
1
3
5
7
2
4
6
9
Hide quick links:
Advertisement
Table of Contents
