Setup - Kettler Atmos Pro Instruction Manual

Setup

Time
Speed
Set up parameter
The treadmill should be completely stopped.
1. Press SET button and all the
numbers in the display area
will become ZERO, except WEIGHT.
2. Press SET button several times to change different
settings and the number in the display area will flick.
• 2 times to change TIME.
• 3 times to change SPEED.
• 4 times to change DISTANCE.
• 5 times to change HEART RATE.
• 6 times to change INCLINE.
3. Press FAST or SLOW button to
rectify the numbers.
4. Press START button to start or STOP button to cancel.
Total distance shown
Treadmill in STANDBY mode and all data in the window are
ZERO.
1. Press SET to show set data.
2. Press SET again and hold the
button for 8 - 10 seconds to show the total distance.
14
Pause/Stop
During the treadmill workout, press the STOP button once for
stopping the treadmill and keep the data recorded so far. If
you press the STOP button again, all the digits on the display
area will return to ZERO.
Set up incline
Before or during the treadmill workout, press the UP/DOWN
incline button on the console or use the incline buttons on
the handrail.
Quick easy speed
Beneath the LCD there are three quick speed keys.
Press START and then any of them to change the speed
automatically.
3km/h
8km/h
16km/h
Exit set up mode
Press the STOP button to exit
Setup options.
Power save mode
This treadmill will automatically switch into power save mode
after three minutes of no usage.
Distance
Heart Rate
Calories / Weight
Incline