Table of Contents
Advertisement
setup screen
SETUP
On the network, you can set up basic information on the camera, video and audio, network
events and system.
1. In the Live screen, click [ Setup (
2. The Setup screen appears.
J
The setting page for preview video requires the STW web viewer plug-in to be installed on the PC.
If it is not intalled properly, the installation page automatically apprears.
BASIC SETUP
Video profile
1. From the Setup menu, select the
<Basic (
2. Click <Video profile>.
3. Configure <PTZ Mode>.
PTZ mode can be activated by
selecting it while the camera is on the
outside.
When connecting to the camera from
external NVR, ISV, our SmartViewer,
and if the PTZ control command is
sent from them, the PTZ mode the
administrator already selected will be
the one used for operation.
When DPTZ mode was selected, DPTZ
is active in profile 1 set to DPTZ only.
54_ setup screen
)> tab.
) ] .
Advertisement
Table of Contents
