Samsung SNB-9000 User Manual page 32

network connection and setup
If using a Broadband Router
• IP Address : Enter an address falling in
the IP range provided by the Broadband
Router.
ex) 192.168.1.2~254,
192.168.0.2~254,
192.168.XXX.2~254
• Subnet Mask : The <Subnet Mask>
of the Broadband Router will be the
<Subnet Mask> of the camera.
• Gateway : The <Local IP Address> of
the Broadband Router will be the <Gateway> of the camera.

M
The settings may differ depending on the connected Broadband Router model.
For more information, refer to the user manual of the applicable router.

For more information about port forwarding of the broadband router, refer to "Port Range
Forward (Port Mapping) Setup". (Page 35)
If the Broadband Router has more than one camera connected
Configure the IP related settings and the Port related settings distinctly with each other.
ex)
IP related settings
Port related settings

M
If the <HTTP Port> is set other than 80, you must provide the <Port> number in the address bar
of the Internet browser before you can access the camera.
ex) http://IP address : HTTP Port
http://192.168.1.100:8080
32_ network connection and setup
Category
IP Address
Subnet Mask
Gateway
HTTP Port
VNP Port
Camera #1
192.168.1.100
255.255.255.0
192.168.1.1
8080
4520
Camera #2
192.168.1.101
255.255.255.0
192.168.1.1
8081
4521