Table of Contents
Advertisement
setup screen
4. Select <Area> tab.
You can specify an area on the screen
to include or exclude the area to/from
detection.
You can specify up to 4 areas.
• Detection area : Sets the entire
screen as excluded from detection,
and adds specified area as motion
detection area. Click and drag with
the mouse to select an area on
the video image to be detected (a
detectable area) and to specify the
desired position.
• Non detection area : Sets the entire
screen as motion detection area,
and excludes specified area as not
to be detected. Click and drag with
the mouse to select an area on the
video image not to be detected (an
undetectable area) and to specify the
desired position.
5. To delete an area, right click on the
screen to open popup context menu
and select Delete, and [OK] button.
6. When done, click [Apply (
106_ setup screen
)].
Advertisement
Table of Contents
