Table of Contents
Advertisement
MD / VA
Events of motion detection and video analysis can be set to trigger event signal output.
1. From the Setup menu, select the
<Event (
)> tab.
2. Click <MD / VA>.
3. Set whether or not to <Enable>.
4. According to your purpose, select from
motion detection and intelligent video
analysis.
5. Set <Sensitivity>, <Size> and <Area>.
When selected Intelligent Video
Analysis, set <Analytics> too.
M
When Video Output turns on, images
cannot be seen in all preview windows
except for DPTZ setup.
6. Specify the activation time and
activation condition.
For more information about <Activation
time> and <Action>, refer to "Alarm input".
(page 99)
7. When done, click [Apply (
)].
English _103
Advertisement
Table of Contents
